Dear friends! Welcome to GSGT Battery Mall! Factory direct sales, quality assurance, sincerely recruit global agents! Email: qh112807@163.com
+86-0769-81520080
All Product Categories

Service hotline Service hotline:+86-0769-81520080

Service email Service email:qh112807@163.com

Home

News

News Center -GSGT Mall Notes on the application of lead-acid batteries in Toyota forklifts

Notes on the application of lead-acid batteries in Toyota forklifts

Time:2024-04-18 10:08:31

Browse:129

When Toyota forklifts use lead-acid batteries, in order to ensure their normal operation and extend their service life, the following aspects need to be paid attention to
When Toyota forklifts use lead-acid batteries, in order to ensure their normal operation and extend their service life, the following aspects need to be paid attention to:

1. Charging and discharging
Charging environment: The charging of the battery should be carried out in an environment where the battery is dry and bright, clean and dust-free, the temperature is maintained between 10 and 30 ° C, and there are no various electrical appliances and natural tinder. For the new battery, the initial charge must be carried out before the first use, and the charging current should be smaller to avoid overheating of the battery and facilitate the chemical reaction to go deep inside the plate and eliminate plate vulcanization.
 i.Overcharge and overdischarge: Avoid overcharge and overdischarge. Overcharging will cause the chemical reaction inside the battery to accelerate, the battery to overheat, shorten the service life; Overdischarge will cause the battery storage power to run out, affecting the normal operation of the forklift.
 ii.Discharge management: The minimum discharge voltage of the battery should not be less than 1.7V/ only. When the discharge voltage of the battery is reduced to 1.7V/ only, the discharge should be stopped immediately and the charge should be carried out in the shortest time.

2. Environment and maintenance
Ambient temperature: The performance of lead-acid batteries is greatly affected by ambient temperature, and higher temperatures will accelerate the self-discharge of the battery and the loss of active substances, while lower temperatures will reduce the capacity and discharge capacity of the battery. Therefore, in the use of the process to try to maintain the appropriate ambient temperature.
Regular maintenance: Perform regular maintenance, including cleaning the battery shell and checking whether the battery connector is loose or corroded, to ensure the normal operation of the battery. At the same time, the battery water level should be checked regularly to keep the battery dry and clean.
Avoid short circuit: The voltage of the lead-acid battery is relatively high, and once a short circuit occurs, it will cause serious safety accidents. Therefore, special attention should be paid to avoid the occurrence of short circuit when using, such as avoiding contact between the positive and negative electrodes of the battery, and not placing metal items on the battery.
Storage and charging: Batteries that are not used for a long time should be charged regularly to avoid self-discharge resulting in battery exhaustion. Storage does not exceed three months need to charge, if idle charging less than two weeks of the battery, need to discharge and then replenish the power.

3.Other precautions
Correct installation: The installation should follow the instructions, the correct connection, the distance between the electrodes, the liquid level of the electrolyte should also be added according to the instructions.
Test and record: Periodically test the performance of the lead-acid battery, including testing the battery voltage, current, internal resistance and other parameters, in order to find problems in time and take appropriate measures. At the same time, you can use a notebook and other tools to record the charging and discharging process, in order to better grasp the use of the battery.
Safe use: When using lead-acid batteries, pay attention to safe use, such as avoiding damage to the battery shell, preventing the battery from being inverted, and avoiding the use of excessively aging batteries.

In summary, when using lead-acid batteries, Toyota forklifts need to pay attention to charging and discharge management, environment and maintenance, avoiding short circuit and safe use to ensure the normal operation of the battery and extend its service life.
Statement: The articles on this site are written by the GSGT team or reprinted from other media or compiled by AI.No reproduction without permission.For copyright or other issues, please contact:gsgtpower@163.com.
Email:qh112807@163.com
微信二维码
Tel:+86-0769-81520080

MESSAGE

Name:

Phone:

Email:

Content:

Professional And Efficient

Professional And Efficient

Security

Security

Affordable Price

Affordable Price

Professional Services

Professional Services